Honeywell E529.RF, Руководство по установке, Страница: 4 / 5

PN 292-100
Copyright 2013 INNCOM by Honeywell
4. Use the OFF/AUTO button to test Heat/Cool
functions (depending on the HVAC system, fan
operation may only subside to a minimal level).
Press OFF/AUTO to return to Auto mode. Press
the FAN button to cycle fan speed from LO to
MED to HI.Press the ecoMODE™ button. Verify
that the LCD displays notification that the
ecoMODE option has been chosen.
5. Test the PIR by entering the
Run
menu and
selecting Value 11. On execution, the LCD shows
Pir and the unit emits a buzzing noise when
movement is detected by the passive infrared
module.
6. Test the door monitor by entering the Run menu
and selecting value 12.
7. If balcony door or window sensors are linked to the
e529.RF, open the linked opening. Verify that the
e529.RF displays notification that the door or
window is open.
Testing e529.RF IRAS and RF network
connections
1. Use the PING parameter to test each device on
the network.
2. Verify that e529.RF LCD displays a dot in lower
right corner of the screen indicating RF link to
HVAC partner.
3. Enter the RUN menu value 2. Execute a test of
the IWAN. If the test is successful, the Room ID
will scroll across the LCD, indicating
communication with the server.
FCC Statement
This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant of part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and , if not installed and used in accordance with the
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

Consult the dealer or experienced radio/TV technician
for help