manualshive.com logo in svg

Honeywell Dolphin Power Tools, Руководство пользователя

Поделиться
Скачать
Honeywell Dolphin Power Tools Скачать руководство пользователя страница 49

2 - 33

EXM File Processing

After decoding, EZConfig Client saves EXM files to the location in the terminal selected in the 

Remote 

Path

 (page 2-20) field on the 

Bar Codes Tab

 (page 2-20). (If the 

Temporary

, page 2-22, option is selected 

in the bar code, EZConfig Client does not save the EXM file.)

There are two types of EXM files: configuration documents and registry documents. EZConfig Client 
processes each type of file differently.

Configuration Documents

If the EXM file was associated with an application, EZConfig Client launches and deploys 
the data to that application for processing.

Note: DeviceConfig.exm 

must

 be associated with DeviceConfig.exe to be processed on 

the terminal appropriately. After decoding the bar code, EZConfig Client deploys the 
data to DeviceConfig.exe, which applies the settings to the terminal. 

Registry Documents

Registry documents are always associated with EZConfig Client. The 

Execute

 option 

(

Execute

, page 2-15) determines whether the registry is updated or not. If Execute is 

selected, EZConfig Client updates the registry immediately after decoding the bar code.

Multiple Bar Codes

Some EXM files generate more than one bar code. If multiple bar codes were generated, EZConfig Client 
recognizes that there is more than one bar code in the package and tracks each bar code scanned and 
decoded. Bar codes can be scanned in any order, but EZConfig Client does not deploy the data until 

all

 

the bar codes in the package have been scanned.

EZConfig Client Window

Field

Description

Package ID

This is the ID of the entire package. 
EZConfig Editor assigns an ID to bar code packages when creating the bar code. 

Status

This field displays the decode status of the bar codes scanned so far. 
If there is more than one bar code in the package, this field acts as a decode 
counter. 
The Status field displays:
• How many bar codes have been scanned and 
• How many bar codes are in the package

Read # box

This box displays the list of bar codes scanned and decoded.

Accept Unsecure

This option allows EZConfig Client to scan bar codes that are not encrypted.

Note: By default, all bar codes created in EZConfig Editor are encrypted.

Содержание Dolphin Power Tools

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды