Honeywell Dolphin CT60, Руководство пользователя

Страница: 55 / 124

Dolphin CT60/CT60 XP Mobile Computer User Guide 43
Region of Interest Set the ROI for decoding. Options include:
• Disable
ROI is disabled and the entire original image is sent to the
decoder.
• Standard
Use the aimer position to weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
• Standard, aimer centered
Activity calculated on the row and the column in the
middle of each cell. The ROI window will always include
the aimer.
• DPM, aimer centered
Activity calculated on 4 rows and 2 columns in each cell.
The ROI window will always include the aimer.
• Kiosk/presentation application
Ignore aimer position, no weight activity. Activity
calculated on the row and the column in the middle of
each cell. The ROI window may not include the aimer.
• Learning Engine
When selected, the computer will receive continuous
updates to improve the decoder software based on your
specific environment. The
Staging Hub Agent must also be
enabled.
Disabled
Multicode Scan When you enable Multicode Scan, each barcode is checked to see
whether it satisfies the defined multicode rules before the results
are transmitted. Options include:
• Enable or disable multicode scanning.
• Set the number of barcodes.
• Specify a separator to be used between barcodes.
• Define up to 10 barcodes to be included in the multicode.
• Set a timeout in milliseconds. If set with a non-zero value,
the timeout starts after the scan button is pressed. Once
the timeout occurs, scanning will return to standard
(single) barcode mode.
• Enable or disable the transmission of an incomplete
multicode. When enabled, the incomplete multicode is
transmitted when the incomplete transmission timeout
expires.
• Set a timeout in milliseconds to use when incomplete
transmission is enabled. If set with a non-zero value, the
timeout starts after the scan button is pressed. Once the
timeout occurs, the results that were collected before the
timeout happened will be transmitted if they satisfy the
defined multicode rules.
Disabled
Setting Description Default