Honeywell Dolphin 9900 страница 52 Скачать руководство пользователя | Manualshive

Страница: 52 / 170

background image

2 - 36

Rev A

8/6/08

Dolphin® Power Tools User’s Guide

Note:

DeviceConfig.exm must be associated with DeviceConfig.exe to be processed on the terminal
appropriately. After decoding the bar code, EZConfig Client deploys the data to
DeviceConfig.exe, which applies the settings to the terminal.

Registry Documents

Registry documents are always associated with EZConfig Client. The Execute option
(

Execute

, page 2-16) determines whether the registry is updated or not. If Execute is selected,

EZConfig Client updates the registry immediately after decoding the bar code.

Multiple Bar Codes

Some EXM files generate more than one bar code. If multiple bar codes were generated, EZConfig Client
recognizes that there is more than one bar code in the package and tracks each bar code scanned and
decoded. Bar codes can be scanned in any order, but EZConfig Client does not deploy the data until all
the bar codes in the package have been scanned.

EZConfig Client Window

Scanning Bar Codes Directly from the Power Tools Main Window

When the Power Tools or Demos main windows are open, press the SCAN key and:

• If there is only one bar code in the package, EZConfig Client decodes and deploys the bar code without

opening the EZConfig Client window.

• If there are multiple bar codes in the package, EZConfig Client decodes the first bar code and opens

the EZConfig Client window showing that one bar code in the package has been scanned.

Field

Description

Package ID

This is the ID of the entire package.
EZConfig Editor assigns an ID to bar code packages when creating the bar code.

Status

This field displays the decode status of the bar codes scanned so far.
If there is more than one bar code in the package, this field acts as a decode
counter.
The Status field displays:

• How many bar codes have been scanned and
• How many bar codes are in the package

Read # box

This box displays the list of bar codes scanned and decoded.

Accept Unsecure

This option allows EZConfig Client to scan bar codes that are not encrypted.
Note: By default, all bar codes created in EZConfig Editor are encrypted.

«
...
50
51
52
53
54
...
»

Содержание Dolphin 9900











































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Dolphin 9900

Бренд: HITEC Страницы: 24

Бренд: Motormate Страницы: 2

Бренд: Raider Страницы: 72

Бренд: Hama Страницы: 21

Бренд: Hama Страницы: 12

Pocket Power StarLight 2800

Бренд: Halo2Cloud Страницы: 10

Belt-Pack B1245

Бренд: Sachtler Страницы: 24

Бренд: Wagan Страницы: 2

Бренд: ELTEX Страницы: 24

Бренд: Laser Страницы: 6

Бренд: Yamaha Страницы: 129

Бренд: Anywhere Cart Страницы: 9

Бренд: Curtis Instruments Страницы: 12

Бренд: Hama Страницы: 2

Бренд: Hama Страницы: 2

Highspeed FlashPen Floater USB 2.0

Бренд: Hama Страницы: 4

Бренд: Hama Страницы: 4

Бренд: Hama Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды