manualshive.com logo in svg

Honeywell Dolphin 99 EX, Руководство пользователя

Поделиться
Скачать
Honeywell Dolphin 99 EX Скачать руководство пользователя страница 20

2 - 2

I/O Cover

All Dolphin 99EX models intended for use in potentially explosive atmospheres are shipped with an I/O 
Cover installed over the I/O connector. 

The I/O Cover must be included on all 

99EX

XXX-XXXXXXX

I

 models used in hazardous environments to meet 

compliance requirements. 

For agency rating and approval information, see 

Approvals by Country

 on page 

1-4.

Removing the I/O

You should carefully read all warnings starting on page 

2-1

 before attempting to remove the I/O cover. 

The I/O Cover and the M2 screws securing the cover must be installed for use in Hazardous 
Locations.

Warning: 

Explosion Hazard. Do not replace components unless power has been switched off or the

area is known to be non-hazardous.

Warning: 

Substitution of any components may impair suitability.

Warning:

 Explosion Hazard. Do not use external connectors in areas known to be hazardous.

 

Warning:

 Explosion Hazard. Do not use the terminal in areas known to be hazardous if the I/O cover is 

damaged, missing or not properly installed (e.g., missing M2 screws).

Warning:

 Explosion Hazard. Do not use the terminal in areas known to be hazardous if the terminal is 

damaged, for example: a crack in the display or enclosure, missing keypad buttons or side buttons, or the 
terminal battery well seal is missing or cracked.

The following warnings apply to 

99EX

XXX-XXXXXXX

I

 models.

 

See 

Approvals by Country

 on page 

1-

4

.)

!

!

!

!

!

!

I/O Cover required for use in 
Hazardous Locations.

M2 screws (Qty. 2) required for use in 
Hazardous Locations.

1

2

Содержание Dolphin 99 EX







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды