manualshive.com logo in svg

Honeywell Dolphin 7900, Руководство пользователя

Поделиться
Скачать
Honeywell Dolphin 7900 Скачать руководство пользователя страница 147

Dolphin® 7900 User’s Guide

 Rev F

10/16/07

10 - 11

USSD

Short for Unstructured Supplementary Service Data, (USSD) is a technology unique to GSM that enables session-based text-
messaging as opposed to SMS, which is store-and-send text-messaging. Turnaround response times for interactive applications 
are generally shorter for USSD than SMS. USSD is not currently available on all carrier networks.

USSD communicates with a USSD application portal, a news portal or a chat session with a co-worker. 

Tap Tools > USSD. 

Send

Sends the text entered in the Message section and begins the USSD session.

End

Ends the USSD session.

Message

Enter text to a USSD portal.

Network message

Displays the USSD message received from the network, allowing a session-based interaction. 

Call Log

The Call Log maintains a list of the last 20 calls made or received in each of the following categories:

•

Voice Calls In (Default)

•

Voice  Calls  Out

•

Voice Calls Missed

•

GPRS  Data

You can access the Call Log two ways:

1. Tap Start > Programs > uPhone > Call Log OR 

2. Open the Dialler and tap Tools > Call Log. 

The Call Log opens displaying the last few Voice Calls In; the most recent call always appears at the top. 

Set maximum available

Display a window for the subscriber to enter a PIN number–“PIN2”–from the subscriber. 
When the correct PIN is entered, the maximum available charge units for the user is set on 
the SIM card.

Field

Description

Содержание Dolphin 7900













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды