manualshive.com logo in svg

Honeywell Dolphin 7900, Руководство пользователя

Поделиться
Скачать
Honeywell Dolphin 7900 Скачать руководство пользователя страница 136

9 - 24

Rev F

10/16/07

Dolphin® 7900 User’s Guide

Automatic Connections for Nokia 3650/7650:

•

On the phone, press MENU.

•

Scroll to Connectivity, then press OPTIONS.

•

The Open option should be highlighted. Press SELECT.

•

The Bluetooth option should be highlighted. Press OPTIONS.

•

The Open option should be highlighted. Press SELECT.

•

Scroll to the right tab to access the Paired devices list. Highlight your mobile computer, then press OPTIONS.

•

Scroll to Set as authorized, then press SELECT.

•

In the confirmation screen, press YES.

Automatic Connections for Nokia 6310/8910/8910i:

•

On the phone, press MENU.

•

Scroll to 10 Bluetooth, then press SELECT.

•

Scroll to 4 View Paired Devices, then press SELECT.

•

Highlight the Dolphin terminal, then press OPTIONS.

•

Scroll to 3 Request Connection Authorization, then press NO.

To use a different Bluetooth phone for dial-up networking, you can use the same connection setup, but you must make the new 
phone your favorite. Just run the Get Connected! Wizard again, select the new phone, and make it your new Favorite when 
prompted. 

Содержание Dolphin 7900













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды