CT30/CT33 Low-voltage Thermostat
5
Set adjustment lever (CT30 only)
1
Separate cover from thermostat,
and remove the plastic insert.
2
Use a pencil to move the adjust-
ment lever to the proper setting for
your system (see table below).
Finish installation
1
Align the 3 tabs on
the cover with slots
on the thermostat,
then push gently
until the cover
snaps into place.
2
Restore electrical
power at the heat-
ing/cooling system,
or at the fuse/
circuit-breaker
panel.
Cover
Thermostat
(shown with
optional
cover plate)
Your system
Setting
Gas or oil furnace
(less than 90% efficiency)
0.4
Electric furnace
(any type)
0.3
High efficiency furnace
(more than 90% efficiency)
0.8
Hot water system
0.8
Gas/oil steam or gravity system
1.2