XFL5 HARDWARE MIGRATION ADAPTER
3
MU1B-0074 IE10 R0518
INSTALLING THE XFL5 HARDWARE MIGRATION ADAPTER
IMPORTANT NOTES
• Before starting the migration, refer to the notes (See step 3 of the “Removing XFL5xx I/O Modules from
XSL513/XSL514 terminal blocks” section on page 2) that indicate the location of each type of XFL5xx I/O module.
Select the precise XFL5 Hardware Migration Adapter and XF8xx/XFR8xx I/O module as described in Fig.1 and
Table 1.
Fig. 1.
Table 1.
• Migrating the XFL5xx LON I/O modules require additional space as after installing the XFL5 Hardware Migration
Adapter and XF8xx/XFR8xx Panel Bus I/O module, the height and width increases by 29mm and 15mm respec-
tively.
ALL DIMENSIONS ARE IN MM
1.
Refer to the notes (See step 6 of the “Removing
XFL5xx I/O Modules from XSL513/XSL514 terminal
blocks” section on page 2) for the module address of
the XFL5xx I/O module and adjust the rotary dial on
the XFL5 Hardware Migration Adapter to set the
address.
2.
Install the new safety latches between each terminal
block as shown in the following figure.
B
A
Sl.
No.
XFL5xx
I/O
module
type
ComfortPoint
Open XFL5
Hardware
Migration Adapter
Model Name (A)
XF8xx/XFR8xx
I/O Module (B)
1
XFL521A
XFL521B
CPO-XFL521M
XF821A
2
XFL522A
XFL522B
CPO-XFL522M
XF822A/XFR822A
3
XFL523A
XFL523B
CPO-XFL523M
XF823A
4
XFL524A
XFL524B
CPO-XFL524M
XF824A/XFR824A
Before Migration
After Migration
B+15
B
A
(114.5)
(99.5)
(89)
A+29
(118)
Rotary dial
XFL5 Hardware Migration
Adapter