manualshive.com logo in svg

Honeywell COMBISAFE ESCALIB, Руководство пользователя, Страница: 9 / 17

Поделиться
Скачать
Honeywell COMBISAFE ESCALIB Скачать руководство пользователя страница 9

WWW.COMBISAFE.COM

9

1

 - Reposition the guardrails to close 

any side exits. Check that the M24 
screws are tight in place. Attach the 
crane hooks to the 2 lifting rings.
Detach the anchors.

2

 - Move the Escalib. Pivot the Escalib 

according to the height of the level 
which needs to be accessed with 90° 
rotations; Install 8 cm away from the 
wall.

REQUIREMENTS:

> Fit new anchorages as new 
modules are added.
> The dismantle must be done in 
the reverse order of assembly.

3

 - Positioning on the ground and 

leveling the Escalib.

4

 - Anchor the Escalib 

before removing the 
slings from the crane.

5

 - At the access levels, the 

guardrails are positioned so as to 
privilege access by the main face A 
(face names shown on the sticker).

6 

- Check that the stair tower has 

been anchored before unhooking 
the slings. Guardrails must be 
swung out of the way to allow 
access to the required level.

30°

max.

LIFTING AND MOVING

(No more than 8 modules stacked)

WARNING:

Check that the ground on which the staircase Escalib is to be erected is able to withstand the load.

WARNING:

Comply with the general rules for handling and stability.

7 

- Fill the Pre-Use Inspection Report

Содержание COMBISAFE ESCALIB


















Отзывы:

Нет отзывов