Honeywell CentraLine CLIOL821A Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 18

Honeywell CentraLine CLIOL821A Скачать руководство пользователя страница 1

LonWorks Bus I/O Modules

Product Data

Copyright © 2019 Honeywell GmbH ● All Rights Reserved

EN0Z-0980GE51 R0119

GENERAL

The CentraLine L

ON

W

ORKS

Bus I/O Modules communicate

via the L

ON

W

ORKS

Bus.

These pluggable CentraLine L

ON

W

ORKS

Bus I/O modules

consist of a terminal socket and a removable electronic
module, allowing the socket to be mounted and wired before
the electronic module is installed. All such electronic modules
can be swapped out without disrupting the power and bus
connections: Simply unplug the “old” and insert the “new”
module.

WARNING

Risk of electric shock or equipment damage!

►

Do not touch any live parts in the cabinet.

►

Disconnect the power supply before you start to install
the control system. More than one disconnect switch may
be required to de-energize the system.

►

Do not reconnect the power supply until you have
completed the installation.

►

Unused terminals must be closed (by completely
screwing in the terminal screws), thus preventing the
accidental touching of “live” parts.

Software updates, configuration, and commissioning are all
done automatically by the controller for all L

ON

W

ORKS

Bus I/O

Modules.
The L

ON

W

ORKS

Bus I/O Modules may be used with any CPU

supporting L

ON

W

ORKS

Bus communication (e.g., the LION,

EAGLE, etc.).

FEATURES



Plug-and-play functionality for easy maintenance.



Pluggable L

ON

W

ORKS

Bus I/O modules can be exchanged

without rewiring. Further, the separate installation of
terminal sockets and electronic modules lower risk of
damage and theft in the construction phase.



Fast wiring with state-of-the-art push-in terminals (screw-

type terminals also available) and bridge connectors.



Wide range of sensors supported (NTC20kΩ, NTC10kΩ,

PT1000-1/-2, Johnson A99 PTC, NI1000TK5000, PT3000,
Balco500, 0/2…10 V, 0/4…20 mA).



Binary input LEDs of the CentraLine L

ON

W

ORKS

Bus I/O

Modules can be configured for status display (off / yellow)
or alarm display (green / red) per channel.



Configurable safety position for outputs, in case of loss of

communication with the controller.



Max. wiring flexibility due to optional accessories like

auxiliary terminals and cross-connectors.



Can be mounted in small installation housings



Flexible mix of L

ON

W

ORKS

Bus I/O modules covering all

your application requirements.

1
2
3
...
»

Содержание CentraLine CLIOL821A



















Отзывы:

Нет отзывов