manualshive.com logo in svg

Honeywell Captuvo Series, Руководство пользователя

Поделиться
Скачать
Honeywell Captuvo Series Скачать руководство пользователя страница 4

UL Statement

UL listed: UL60950-1, 2nd Edition.

Canada

Industry Canada ICES-003

This Class B digital apparatus complies with Canadian ICES-003.  Operation is 
subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference 
that may cause undesired operation.

Conformité à la règlementation canadienne

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du 
Canada. Son fonctionnement est assujetti aux conditions suivantes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le 
brouillage pouvant causer un fonctionnement indésirable.

C-UL Statement

 C-UL listed: CSA C22.2 No.60950-1-07, 2nd Edition.

Europe

The CE marking indicates compliance to 2004/108/EC EMC Directive 
with Standards EN55022 CLASS B, EN55024, EN61000-3-2, 
EN61000-3-3. In addition, complies to 2006/95/EC Low Voltage Direc-
tive, when shipped with recommended power supply.

For further information please contact:
Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands

Honeywell International Inc. shall not be liable for use of our product with equip-
ment (i.e., power supplies, personal computers, etc.) that is not CE marked and 
does not comply with the Low Voltage Directive.

Содержание Captuvo Series





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды