manualshive.com logo in svg

Honeywell Captuvo Series, Руководство пользователя

Поделиться
Скачать
Honeywell Captuvo Series Скачать руководство пользователя страница 130

7 - 2

•

The battery is in the battery well.

•

The battery has been charged for at least 4 hours.

•

Make certain that the Honeywell Captuvo mPOS Simulator application from 
the Apple App Store

SM

 is loaded.

Is the sled having trouble reading your symbols?

If the sled isn’t reading symbols well, check that the symbols:

•

Aren’t smeared, rough, scratched, or exhibiting voids.

•

Aren’t coated with frost or water droplets on the surface.

The sled won’t read your bar code at all.

1. Scan the sample bar codes in the back of this manual.  If the sled reads the 

sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see 

Chapter 5

).  

2. If the sled still can’t read the sample bar codes, scan 

"All Symbologies 

On" on page 5-2

.

If you aren’t sure what programming options have been set in the sled, or if you 
want the factory default settings restored, scan 

Resetting the Factory 

Defaults

on page 1-10.

Содержание Captuvo Series





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды