Honeywell BENDIX/KING KLN 94, Руководство пилота

Страница: 159 / 284

To calculate distance, bearing, time, and ESA from present position
to another waypoint:
1. From the AUX 4 page (figure 5-
58), turn on the cursor (
B
). It
will appear over a field that either
displays
Ppos , Fpl , or Wpts .
2. Turn the right inner knob to
change this field to
Ppos .
3. Turn the right outer knob to
move the cursor over the
To
waypoint field (figure 5-59)
4. Enter the desired “to” identifier
and press
F
. You will be
shown the waypoint page for the waypoint you entered. Press
F
again to approve.
5. Select your estimated ground-
speed for the trip. As you
change it, the estimated time en
route (
ETE ) calculation will be
updated (figure 5-60).
To calculate distance, bearing, time , and ESA from waypoint to way-
point:
1. From the AUX 4 page, turn on the cursor (
B
) and use the right inner
knob to select Wpts (figure 5-
61).
2. Turn the right outer knob clock-
wise to move the cursor to the
“from” waypoint in the upper
right corner of the screen (figure
5-62).
3. Enter the desired identifier for
the “from” waypoint and press
F
. You will be shown the way-
point page for the waypoint you
entered. Press
F
again to
approve.
4. With the cursor over the “to”
waypoint, enter the desired iden-
tifier (figure 5-63) and press
F
twice. The bearing will be dis-
KLN 94 Pilot’s Guide Chapter 5 Intermediate Operation
5-25
Figure 5-58
Figure 5-59
Figure 5-60
Figure 5-61
Figure 5-62
Figure 5-63