44
APT4000PH
Configuration
Output 2
Temperature error. Output current during Hold.
Select °C/°F
Select temperature probe
Select 0-20 / 4-20 mA
Enter current beginning
Enter current end
Set output filter
22 mA for temp error
Hold mode
End:
Press
CONF
, then
ENTER
Output 2
o2.
Code Display
Menu group
Select menu item
45
OFF
(ON)
Code Display
Action
Choices
o2.
22 mA signal for error message
Select with
key
Proceed with
ENTER
Output signal during Hold
LAST:
During Hold the last measured value
is maintained at the output
FIX:
During Hold a value (to be entered)
is maintained at the output
Select with
key
Proceed with
ENTER
LAST
(FIX)
Only with FIX selected:
Enter current which is to flow at the
output during Hold
Select with
key,
edit number with
key,
proceed with
ENTER
021.0 mA
(000.0 to
021.0 mA)
Output signal during Hold:
Output current
[mA]
Output signal Hold
Setting FIX = 21.0 mA
Hold active
21
4
Output signal Hold
Setting LAST
Hold active
