3
Shredder motor continues to run after shredding is complete.
The waste bin is full and not allowing paper to exit shredder head.
Unplug the shredder and empty the waste bin.
Paper is jammed and shredder does not run in “AUTO” position.
Too many sheets of paper are being fed into shredder at one time.
Turn switch to “REV” position and clear.
Warning
Operation, maintenance, and service requirements are covered in
the instruction manual. Read the entire instruction manual before
operating shredders.
Avoid hair touching the document feed opening.
Avoid touching the document feed opening with hands.
Avoid clothing touching the document feed opening.
Avoid shredding staples and clips.
Product is not intended for use by children (product is not a toy).
Keep aeresol products away.
Shredder does not run in “AUTO” or “REV” position.
Motor exceeded operating temperature, overheat protection feature
shut it off.
Unplug the shredder and allow it to cool at least 40 minutes before
using again.
Shredded paper does not completely exit shredder head.
Shredded paper is caught in the blade slots.
Turn switch to “REV” position to clear. You may also need to unplug
shredder and manually remove paper from shredder exit.
Shredder does not run when paper is fed into feed opening.
Paper is not entering feed opening at a proper angle to touch
activating sensor.
Remove and adjust the position of the paper so that activates the motor.
Paper is too thin, soft, wrinkled to activate shredder motor.
Remove paper and fold it before inserting it into shredder.
PROBLEM:
CAUSE:
SOLUTION:
PROBLEM:
CAUSE:
SOLUTION:
PROBLEM:
CAUSE:
SOLUTION:
CAUSE:
SOLUTION:
PROBLEM:
CAUSE:
SOLUTION:
PROBLEM:
CAUSE:
SOLUTION:
MARKING AND INSTRUCTIONS
TROUBLESHOOTING TIPS
