INTRODUCTION
1.
How
to
Use
This
Manual
A.
General
(1) This manual provides information about the installation of the Small SATCOM UAV System.
(2) Standard maintenance procedures that technicians must know are not given in this manual.
(3) This publication is written in agreement with the ATA Specification
(4) Warnings, cautions, and notes in this manual give the data that follows:
• A WARNING gives a condition or tells personnel what part of an operation or maintenance
procedure, which if not obeyed, can cause injury or death.
• A CAUTION gives a condition or tells personnel what part of an operation or maintenance
procedure, which if not obeyed, can cause damage to the equipment.
• A NOTE gives data, not commands. The NOTE helps personnel when they do the related
instruction.
(5) Warnings and cautions go before the applicable paragraph or step. Notes follow the applicable
paragraph or step.
B.
Observance
of
Manual
Instructions
(1) All personnel must carefully obey all safety, quality, operation, and shop procedures for the unit.
(2) All personnel who operate equipment and do maintenance specifie
d i
n this manual must know
and obey the safety precautions.
C.
Units
of
Measure
(1) Measurements, weights, temperatures, dimensions, and other values are expressed in the
USMS followed by the appropriate SI metric units in parentheses. Some standard tools or parts
such as drills, taps, bolts, nuts, etc. do not have an equivalent.
D.
Illustration
(1) Supplemental illustrations use a suff
ix n
umber to the basic figu
re n
umber. For example, if
Figure 501-5 is used, it signifie
s t
hat it is an illustration of the item identifie
d b
y index number 5
in Figure 501.
(2) Illustrations with no specifi
c d
esignation are applicable to all units.
E.
Scope
(1) This manual provides detailed information for avionics technicians about the wiring, installation,
and setup of every component of the Small Satcom. This manual includes information for end
users about how to operate the Small SATCOM. The Small SATCOM connects to the Inmarsat
satellite network and is intended for use on UAVs for command, control and streaming back of
live video and other mission data.
F.
Hardware
Part
Numbers
(1) The SATCOM products are identifie
d b
y the hardware part numbers indicated in Table 1.
(2) Where:
– A change to form fi
t o
r function will be reflecte
d i
n a new base part number.
G.
Organization
(1) This manual Includes the following sections:
Page
INTRO-1
1
8
Feb 2021
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
SMALL SATCOM
