E-MON CLASS 3400 METER
62-0398—02
44
10.2.3 IP Setting Display Screen
To Change the IP settings, complete the following steps:
1.
Press the MENU button.
2.
The following screen will appear:
3.
Use UP or DOWN button until the arrow is on the IP Setting line.
4.
Press the SELECT button. The IP Setting Screen will appear.
5.
Locate the number to be changed in the menu, press and hold Button 4
(Down Button) for 3 seconds, release the button, the last digit for this num-
ber blinks,;
6.
To change the number of the digit, use Button 3 (Up Button) to cycle
through 0 to 9.
7.
Press Button 4 to move to the next digit, and repeat Step 5.
8.
To exit the mode of changing number by digit, press Select Button;
9.
To save the new number, press Main Menu Button and select “Y” to save.
NOTE: The menu items that can be
changed by digit are: IP address/
Gateway/Subnet Mask, BACnet
Device ID, BACnet MSTP MAC
Address/max masters, Modbus ID,
and dollar cost/CO2 lbs for Green
Net meters.
This will also return you to main menu. In main menu, select EXIT to get out of
programming mode and return to normal display mode.
—> LOAD CONTROL
DATE & TIME
DEVICE ID
IP SETTINGS
LOAD CONTROL
DATE & TIME
DEVICE ID
—>IP SETTINGS
ENABLE DHCP?N
IP: 192.168.0.168
MSK:255.255.2550
GWY:192.168. 0.1
Save changes: Y / N
62-0398-02.fm Page 44 Tuesday, May 8, 2018 10:22 AM
