manualshive.com logo in svg

Honeywell 3400, Руководство по установке

Поделиться
Скачать
Honeywell 3400 Скачать руководство пользователя страница 24

E-MON CLASS 3400 METER

62-0398—02

24 

6.7 Honeywell E-Mon Energy RS-485 Wiring 
(continued)

After performing these steps, all of the meters will be connected in a daisy chain 
configuration. This network of meters can then be connected to the RS-485 
network and communication can be established.

Internal Modem (if ordered as option)

An optional internal modem inside one meter will communicate with the others 
via the RS-485 network. Simply connect one of the two telephone jacks on the 
modem to the telephone line to complete the installation.

Local Computer

 

A local computer installed in the building can communicate with the RS-485 
network. The computer must be connected to an RS-232 key. The RS-232 key is 
then connected to an available RS-485 jack in the meter using an RJ-11 cable. 

NOTE:

Don’t confuse the modem’s telephone jacks with the RS-485 jacks!!! 

NOTE:

When using one meter with an internal modem, only the telephone line is 
connected. RS-485 is not needed. 

6.8 RS-232 Communications 

6.8.1 Hard wired System using the RS-232 
Communication Key

The RS-232 communications key allows you to connect Class 3400 meters to a 
personal computer that has the Honeywell E-Mon Energy™ software installed. 
The computer communicates with the meters through the RS-232 key. 

The RS-232 key must be located within 15 feet of the host computer. 

62-0398-02.fm  Page 24  Tuesday, May 8, 2018  10:22 AM

Содержание 3400

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды