Honeywell 2087D Скачать руководство пользователя

Страница: 4 / 16

Batteries and Emergency Override Keys

Remove 4 “AA” batteries and 2 Emergency Override Keys. They are

located in the protective Styrofoam insert at the top of the box.

Opening Safe For The First Time

Home and Office Security Safes

Important: FIRST TIME ACTIVATION

Your safe is ready for activation. To allow the safe to be opened and to prevent
locking of the safe prior to completing the first-time user activation procedures, a
solenoid deactivation safety device has been installed.

Important: ENABLE/DISABLE SOUND

Once the batteries are installed, if you do not hear a beep when entering
the factory pre-set Passcode or during the personal Passcode re-programming

process, enter the following key sequence into the digital keypad: #

This will turn the sound on. Repeat the process if you want the sound turned off.

Notes

User Activation

Install Batteries

1. Turn handle upwards to the right and pull open the safe door.

2. Slide the battery compartment cover (located inside the

safe at the top of the door) forward and remove. Install

the 4 “AA” batteries. Make sure the batteries are installed

in the proper direction as indicated in the battery

compartment. Slide the cover back into place.

3. After the batteries are correctly installed, the red and green

lights located at the top of the keypad on the front of the safe

will blink twice, the keypad backlight will flash once and

you will hear a single beep.

4. Proceed to Activate Lock.

Activate Lock

1. Locate the small plastic Locking Pin on the inside of the

safe door. Grip and pull out completely. Pin can then be

properly discarded.

2. Leave the safe door open and proceed to Electronic

Locking System Test.

RED

LIGHT

GREEN

LIGHT

Содержание 2087D

















Результаты поиска

Содержание 2087D

Отзывы:

Похожие инструкции для 2087D

Бренды по названию

Популярные бренды

Honeywell 2087D, Руководство по эксплуатации и установке

Результаты поиска

Содержание 2087D

Отзывы:

Похожие инструкции для 2087D

Бренды по названию

Популярные бренды