Honeywell 15-0705-5 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 113

Honeywell 15-0705-5 Скачать руководство пользователя страница 34

COMPONENT MAINTENANCE MANUAL

15-0705

Table INTRO-2. MTOSS Function Code Definitions (Cont)

Code

Function

Definition

350

Miscellaneous Repairs

Repairing parts by hand (cutting, drilling,
polishing, grinding, lapping, riveting, blending,
routing, fitting, burring, planishing, sanding,
sawing, recambering, drilling, tapping,
heating, chilling) and including miscellaneous
disassembly and assembly required.

360

Bonding and Molding/Sealing

Joining and curing of parts with an adhesive or
fusible material (including silicone, fiberglass,
glues).

370

Heat Treating

Controlled heating and cooling of a material to
obtain the desired physical property (includes
annealing, tempering, quenching, stress
relieving, solution heat treat, etc.).

380

Surface Treating

Treating the surface of a part by painting,
varnishing, aluminizing, Teflon coating, zinc
chromate priming, tumble finishing, shot
peening, etc. Baking and masking processes
are included.

390

Machine Riveting and Flaring

Joining of parts by riveting and flaring the rivet.

400

INSTALLATION AND ASSEMBLY

410

Install

Installation of the unit/engine onto a workstand,
transport dolly, test stand, or aircraft.

420

Install Modular Sections

The third echelon of assembly consisting of
assembly of the modular assemblies into a
complete unit/engine assembly. The modular
sections are identified by the third element of
the ATA number.

430

Assemble Modular Sections

The second echelon of assembly consisting
of assembling subassemblies into modular
sections. The modular section is identified by
the second element of the ATA number.

440

Assemble Subassemblies

The first echelon of assembly consisting of
assembling piece parts into subassemblies.
The subassemblies are identified by the third
element of the ATA number.

450

Install/Close Items Removed/Opened for
Access

Installation or closing of access plates, closing
of ports, installation of components, tubing
or any item which was removed or opened in
order to provide access to perform the task.

460

Assemble Accessory

Assemble accessory components.

EFFECTIVITY

ALL

33-30-15

Page INTRO-10

30 Mar 2017

© Honeywell International Inc. Do not copy without express permission of Honeywell.

«
...
32
33
34
35
36
...
»

Содержание 15-0705-5


















































































































Отзывы:

Нет отзывов