After the keypad is attached to the Desk Mount, insert the AC Adaptor connector into the keypad’s mating connector
through the rectangular hole in the Desk Mount. With the connection made, the wires can then be dressed to exit the
Mount from the left, right, or back cutouts.
Note that there are wire strain-relief tie points at each exit cutout in the Mount. Use tie-wraps to secure wires.
DESK MOUNT
5
8
2
8
D
M
-0
0
-0
0
3
-V
1
ARM
ED
REA
DY
MIC
MESS
AGE
AC
ADAPTOR
CONNECTOR
INPUT
Figure 3. Wire Breakout Through the Desk Mount
!
The product should not be disposed of with other household waste. Check for the nearest authorized collection centers or authorized
recyclers. The correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and
human health.
Any attempt to reverse-engineer this device by decoding proprietary protocols, de-compiling firmware, or any similar actions is strictly
prohibited.
The Honeywell Home Trademark is used under license from Honeywell International Inc.
This product manufactured by Resideo Technologies, Inc. and its affiliates.
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
2020 Resideo Technologies, Inc.
www.resideo.com
ÊK9284DMŠ
K9284D 3/03 Rev. D
