2
Overview
Just follow these simple steps:
1. Install the push button battery and plug in the doorbell.
2. Set up the doorbell and your preferences.
3. Install the push button.
Power-up
1. Choose an outlet location that is not near a heat source,
where the doorbell will be easy to see and hear, and plug
in the doorbell.
2. Open the push button battery cover and install the
CR2032 battery.
Setup and Operation
Press the push button to test whether it is paired with the
doorbell. The doorbell will light up and ring. If it does not, see “Connect a Push
Button” on page 4.
+
Change the Light Setting
Press the Sunlight button to change the lights that flash
when the doorbell rings.
Press the Sunlight button
1 time
2 times
Top lights only
No lights.
