#
Front/Rear Turn Signal Bulb
1.
Remove the turn signal lens by removing
the screw.
2.
Turn the socket counterclockwise, and
remove it.
3.
Slightly press the bulb in and turn it
counterclockwise.
4.
Install a new bulb and parts in the reverse
order of removal.
u
Use only the amber bulb.
#
License Plate Light Bulb
1.
Remove the nuts A, washers and license
plate bracket.
2.
Remove the nuts B, license light cover
and license light lens.
3.
Slightly press the bulb in and turn it
counterclockwise.
4.
Install a new bulb and parts in the reverse
order of removal.
20171023164032_32KRHH100_eng_BOOK Page 89 Monday, October 23 2017 17:21:44 JST
Electrical Trouble
u
Burned-out Light Bulb
Troubleshooting
86
Screw
Bulb
Turn
signal
lens
Socket
License plate
bracket
License light
lens
Bulb
Washers
Nuts A
Washer
License light
cover
Nuts B