Honda WT30XK4, Руководство пользователя

Страница: 16 / 124

SERVICE INFORMATION
2-5
LUBRICATION & SEAL POINTS
ENGINE
WATER PUMP
Location Material Remarks
Crankshaft pin and gear teeth Engine oil
Piston outer surface and piston ring
Piston pin outer surface
Cylinder barrel inner surface
Connecting rod big and small end bearing
Connecting rod bolt threads and seating surface
Camshaft cam journal and lobes
Valve lifter pivot, pivot end and slipper surface
Valve stem sliding surface and stem end
Valve rocker arm tappet surface and pivot
Rocker arm pivot threads and pivot
Governor weight holder sliding surface and gear
Governor shaft journal
Governor arm shaft journal
Flywheel nut threads and seating surface
Cylinder head bolt threads and seating surface
Balancer shaft bearing and gear
(WT40XK3/GX390T2)
Oil seal lips
Multi-purpose grease
O-ring
Recoil starter case pulley sliding surface
Recoil starter ratchet sliding surface
Recoil starter spring retainer inside
Camshaft lobes
Use molybdenum oil solution
(mixture of the engine oil and
molybdenum grease in a ratio
of 1:1) When installing a new
camshaft
Recoil starter center screw threads
Hondalock 2, Threebond
®
2430, or equivalent
Limiter cap inside
Hondalock 2, LOCTITE
®
638,
or equivalent
Location Material Remarks
Mechanical seal and casing mating surface Petroleum jelly
Wear plate bolt threads
Hondalock 3, Threebond
®
1303N, or equivalent Volute case bolt threads
Outlet bolt threads
61YG1000.book 5 ページ ２０１２年２月２０日 月曜日 午後２時４３分