After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
To remove slack, it may help to
put weight on the child seat, or
push on the back of the seat while
pulling up on the belt.
To deactivate the locking
mechanism and remove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
A child seat with a tether can be
installed in any seating position in
the back seat, using the anchorage
points shown above.
4.
5.
Installing a Child Seat
Installing a Child Seat with a
Tether
50
COVER
ANCHOR
ANCHORAGE POINTS
05/09/22 09:12:58 31SEA620 0053
Содержание TSX 2006
Страница 6: ...9 06 28 31SEA620 0005 ...
Страница 10: ...9 07 04 31SEA620 0009 ...
Страница 62: ...ls U S models Canadian models abels DOORJAMBS 9 14 21 31SEA620 0061 ...
Страница 369: ...9 55 17 31SEA620 0368 ...