Honda TRX420FA1, Руководство пользователя

Страница: 41 / 272

Instruments & Controls
33
Indicators & Displays
The digital clock (1) displays hours and minutes with the clock mark
(2), when the ignition switch is ON (
q
).
To adjust the time, proceed as follows:
1. Turn the ignition switch ON (
q
) to display the clock (page 27).
2. Press and hold the mode button (3) until the display start
blinking.
3. To advance the display 1 minute at a time, press and release the
mode button for 0.5 seconds.
Press and hold the mode button for more 0.5 seconds the display
will begin advancing fast.
4. Release the mode button when the display reaches the desired
time.
5. To set the clock, press and release the mode button for less than
0.5 seconds.
The clock can be set by turning the ignition switch off and then
on.
After the battery is reconnected (page 193), check the clock.
Readjust the clock if necessary.
Digital Clock
(3) mode button
(1)
(2)
(3)
(1) digital clock
(2) clock mark
14 TRX420FA1 FA2-32HR3B000.book 33 ページ ２０１３年９月６日 金曜日 午後１時５７分