4
© Honda Access Corp. 2009
8313010R
CAUTION
BEFORE YOU BEGIN
• This kit should be installed only if the ambient air
temperature is 15°C (60°F) or above. Heat the
bonding surfaces with a hair dryer set on LOW
when the ambient air temperature is below 15°C
(60°F).
• Before attaching the sunshades, thoroughly clean
the bonding surfaces with a cleaner.
• This instruction shows the installation of the
typical sunshade. Shapes and sizes may differ
from the actual sunshade.
• Remove the sunshades in the dark hours.
• When removing the sunshades, do not lose any
parts for the sunshades.
• After removing the sunshades, store them in the
bag for safe-keeping.
• Do not move the rear door window glass
while driving.
• The sunshade may come off unless it is
installed on the clip securely.
• Sunshade must not be used during the
hours of darkness.
• To allow the adhesive to “cure”, do not
install the sunshade for 24 hours. This
process is to ensure that the adhesives on
the clip will reach their maximum bonding
strength.
TOOLS AND SUPPLIES REQUIRED
• Scale
• Felt-tip pen
IMPORTANT INFORMATION
