Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the
(Off) position.
1.
Remove the centre lower cover.
2.
Remove the connectors from the battery
holder.
3.
Remove the battery holder by removing
the bolts.
4.
Disconnect the negative
-
terminal from
the battery.
5.
Disconnect the positive
+
terminal from
the battery.
6.
Remove the battery taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
“Battery Goes Dead.”
20180912132715_32K53L200_eng_BOOK Page 80 Wednesday, September 12 2018 13:33:26 JST
Maintenance
77
Positive
terminal
Battery
Negative
terminal
Bolts
Battery
holder
Terminal
nut
Terminal
nut
Connectors