Honda RF125F, Руководство пользователя

Страница: 86 / 128

76
SPARK ARRESTER
Refer to the Safety Precautions on page 55.
The exhaust system spark arrester must be
purged of accumulated carbon periodically
(see Maintenance Schedule for servicing
period, page 56).
The exhaust system becomes very hot
during operation and remains hot for a
period of time after stopping the engine.
Allow the exhaust system to cool before
performing this operation.
1. Remove the bolts (1), the spark arrester
(2), and the gasket (3) from the muffler
(4).
2. Use a brush to remove carbon deposits
from the spark arrester screen (5). Be
careful to avoid damaging the spark
arrester screen. The spark arrester must
be free of breaks and holes. Replace, if
necessary. Check the gasket. Replace, if
necessary.
3. Install the spark arrester and the gasket
in the muffler and tighten the bolts to
the specified torque.
Spark arrester bolt torque:
10 N·m (1.0 kgf·m, 7 lbf·ft)
(1) Bolts
(2) Spark arrester (3) Gasket
(4) Muffler
(2)
(1)
(3)
(4)
(5) Spark arrester screen
(5)
32K28B00.book 76 ページ ２０１３年５月３１日 金曜日 午前１１時２１分