Honda HSS1332A, Руководство пользователя

Страница: 13 / 32

13
Snow-clearing Tips
For best efficiency, clear snow before it hardens and turns to ice. Do
not reduce engine speed while clearing snow.
Operating tips for clearing hard or deep snow:
• Reduce forward speed. If this is not sufficient, use the shift lever to
clear snow with a back and forth motion.
• Clear a narrower swath. Make several passes with the auger
overlapping the cleared areas.
• If the snow is deeper than the height of the auger, remove it in
several steps, as shown below, or install the drift-breaker kit
(optional part) that is available from your authorized Honda snow
blower dealer.
Removing Obstructions
If the snow discharge chute or snow blowing mechanism becomes
restricted, review snow clearing tips (shown on this page) to reduce
the possibility of reoccurring obstructions.
1. Before removing the obstruction, be sure to stop the engine and
ensure all rotating parts have come to a complete stop. Remove
the spark plug cap from the spark plug (see
page 16 ).
2. Remove the snow clearing bar to clear the obstruction.
3. After unclogging, wipe the bar clean, and secure it in the holders.
4. Reinstall the spark plug cap on the spark plug.
1st
2nd
3rd

WARNING
An obstructed auger or blower could suddenly move
when the obstruction is cleared.
Sudden auger or blower movement can cause severe
injury if your hands are being used to clear the area.
Never clear the discharge chute or auger area with your
hands, and always stop the engine, remove the spark
plug cap, and clear obstructions with the clearing bar.
SNOW CLEARING
BAR
HOLDERS