Honda HRX537HMEA, Руководство пользователя

Страница: 20 / 22

20
ENGLISH
LOSS OF POWER
VIBRATION
MOWING AND BAGGING PROBLEMS
SPECIFICATIONS
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc. Take the mower to an authorized
Honda servicing dealer or refer to the
shop manual for repair.
Possible Cause Correction
Throttle not set to FAST Move the throttle to FAST (page 10).
Grass is too tall to cut Raise the cutting height (page 8), cut a
narrower swath, use a slower ground
speed (page 10), or cut more
frequently.
Mower deck is clogged Clean out the mower deck (page 12).
Air cleaner is clogged Clean or replace the air cleaner
(page 15).
Bad fuel; mower stored without
treating gasoline, or refueled with
bad gasoline Refuel with fresh gasoline (page 6).
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc. Take the mower to an authorized
Honda servicing dealer or refer to the
shop manual for repair.
Possible Cause Correction
Grass and debris lodged under
the mower deck Clean out the mower deck (page 12).
Blades loose, bent, damaged, or
unbalanced by improper
sharpening Tighten loose blade bolts (page 18).
If blades are found to be bent or
damaged, take the lawn mower to an
authorized Honda servicing dealer for
inspection.
Mechanical damage, such as a
bent crankshaft Take the mower to an authorized
Honda servicing dealer or refer to the
shop manual for repair.
Possible Cause Correction
Engine speed is too slow to cut
well Move the throttle lever to the FAST
position (page 5).
Mower is moving too fast for lawn
conditions Shift to a slow speed (page 10) or push
slower.
Cutting height adjustment levers
set at different positions Set all levers at the same cutting height
position (page 8).
Grass bag overfilled or clogged Empty the grass bag. Wash the grass
bag if it is clogged with dirt (page 18).
Mower deck is clogged Clean out the mower deck (page 12).
Blades dull, worn, or damaged Sharpen or replace the blades if
necessary (page 17).
Wrong blades installed Install correct blades (page 17).
MODEL HRX537C1
TYPE HXEA HMEA
DESCRIPTION CODE MAGA
GENERAL
Length
1770 mm
Handlebar height
(Middle position)
1105 mm
Dry weight
42.1 kg 43.1 kg
Width
585 mm
Cut width
530 mm
Cut height adjustments
20 mm, 32 mm, 46 mm,
62 mm, 75 mm, 88 mm, 100 mm
Grass bag capacity
88

Sound power level
(According to 2000/14/EC
Directives)
98 dB(A)
Vibration test (According to
project EN1033/1993,
ENV25349/1993,
ENV28041/1993,
ISO5347/1987 &
ISO5348/1987)
4.5 m/s
2
ENGINE
Model
GCV190
Type
4-stroke, single cylinder, vertical shaft, OHC
Displacement
187 cc
Bore and stroke
69 x 50 mm
Cooling
Forced air
Lubrication
Splash and spray
Compression ratio
8.5:1
Maximum speed
2,850 rpm
Idle speed
1,700 ± 150 rpm
Ignition system
Transistorized magneto
Spark plug
NGK: BPR5ES
Spark plug gap
0.7 ~ 0.8 mm
Air cleaner
Dry element type
Recommended fuel
Unleaded gasoline with a pump octane rating
of 86 or higher
Fuel tank capacity
0.91

Recommended oil
SAE 10W-30, API SJ or later
Engine oil capacity
0.55

* Refill amount: 0.35 ~ 0.40

* Actual amount will vary due to residual oil in the engine. Always use the
dipstick to confirm the actual level (see page 4).
DRIVE
Type
Hydrostatic
Engine to transmission
V-belt
Main clutch
Fluid type
Mower speed
(engine @ 2,850 rpm)
0 ~ 1.61 m/s
Recommended fluid
Honda hydrostatic
+0
–100
HXE.book Page 20 Monday, August 6, 2007 10:44 AM