background image

8

Refuel With Care

Gasoline is extremely flammable and gasoline vapor can explode. 
Refuel only outdoors, in a well-ventilated area, with the engine OFF. 
Never smoke near gasoline, and keep other flames and sparks away. 
Always store gasoline in an approved container.

Wear Protective Clothing

Wearing protective clothing will reduce your risk of injury. Long pants 
and eye protection reduce the risk of injuries from thrown objects. 
Sturdy shoes with aggressive soles will help protect your feet and give 
you better traction on slopes or uneven ground.

Stop the Engine When Not Mowing

If you need to leave the mower for any reason, even just to inspect the 
lawn ahead, stop the engine by releasing the blade control lever.

Avoid Slopes

Avoid steep slopes of more than 
20

°.

Mow across slopes, not up and 

down. Be careful when changing 

direction. Mowing on a slope 

when the grass is damp or wet 

could cause you to slip, fall, and 

lose control of the mower.

NOTICE

Mowing on steep slopes can 

starve the engine of oil, causing engine damage that is not covered by 

the 

DISTRIBUTORS LIMITED WARRANTY (

page 21

).

Keep all four wheels on the ground, and be careful to avoid losing 
your footing and your control of the mower. Keep a firm grip on the 
handlebar, and walk, never run, with the mower. Be very careful when 
mowing uneven or rough ground.

If stuck, do not kick or shove the mower with your foot. Use the 

handlebar to control the mower.

Avoid Obstacles

Gravel, loose stones, and landscaping material can be picked up by 

the mower and thrown many feet with enough force to cause serious 

personal injury and/or property damage. The best way to prevent 

potential injury from thrown objects is to release the blade control 

lever to stop the blades before reaching areas with gravel, loose 

stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the 
surface of the lawn such as sprinkler heads, paving, edging, raised 
tree roots, etc.

If the blade hits something, or if the mower starts to vibrate, stop the 

engine immediately, disconnect the spark plug cap, and check for 

damage (

page 12

). Striking objects may damage the blades, bend the 

crankshaft, and/or break the mower deck or other components. 

Vibration usually indicates serious trouble. 

The 

DISTRIBUTOR’S LIMITED WARRANTY

 (

page 21

) does not cover 

parts damaged by accidental impact collision.

Operating the Controls

Throttle Lever

For best cut quality, always mow 

with the throttle lever in the FAST 

position. When the blades rotate at 

the preset fast speed, they create a 

strong fan action that lifts and cuts 

grass more efficiently.

Do not try to increase the preset 

FAST engine speed; the blades 

could fracture and come apart.

Blade Control System

To start blade rotation, make 

sure the engine is running 

and the throttle lever is in the 
FAST position.

1. Push down and hold the 

Roto-Stop

®

 button 

.

2. Pull the blade control lever 

 quickly against the 

handlebar allowing the 

engine to bring the blades 

up to full speed. Then 

release the Roto-Stop 

button.

Continue to hold the blade control lever against the handlebar to 

maintain blade rotation. Always keep the blade control lever fully 
engaged while mowing. Do not partially disengage - doing so will 
reduce the life of the blade clutch system.

Release the blade control lever quickly to stop blade rotation. 

Always release the blade control lever before starting the engine to 

prevent the blades from rotating.

Adjusting the Select Drive Control

With the engine running and 

the blades rotating, slowly 

push the Select Drive control 

to propel the mower forward.
Normal operation is with your 

hand comfortably around the 

handle bar and Select Drive 

control. 
Push the Select Drive control 

with your thumb into the 

indentation for extra torque 

(up a hill, or through thick 

grass).
You can reduce the ground speed by partially releasing the Select 

Drive control. 
Ground speed varies with terrain, grass height, slope, and grass bag 

weight. Moving the Select Drive knob (

page 9

) or varying how far you 

push the Select Drive control forward allows you to maintain the 

desired ground speed under constantly changing mowing conditions.
Release the Select Drive control to disengage (stop) the rear wheels.
Disengage the drive when mowing around trees and other obstacles. 

Push the mower around obstacles for better directional control.

 WARNING

A worn, cracked, or damaged blade can break, and 
pieces of the damaged blade can become dangerous 
projectiles.
Blades thrown from the mower could seriously hurt or 
kill someone.
Inspect the blades regularly (see 

page 12

), and do not 

operate the mower with a worn or damaged blade.

FAST

STOP

ROTO-STOP 
BUTTON

BLADE CONTROL LEVER

SELECT DRIVE CONTROL

Содержание HRX217VYAA

























Отзывы: