Honda HRU196K1 Скачать руководство пользователя | Manualshive

Страница: 7 / 67

background image

6

2. SAFETY INSTRUCTIONS - continued



Use extreme caution when reversing or pulling the lawn mower toward
you.



Stop the blades if the lawn mower has to be tilted for transporting, when
crossing surfaces other than grass and when transporting the lawn mower
to and from the area to be mowed.



Never operate the lawn mower with defective guards or shields, or without
guard devices (for example, discharge guard).



Do not attempt to make cutting height adjustments while the engine is
running.



Do not change the engine governor setting or over-speed the engine.



Disengage drive clutch before starting the engine.



Always start the engine according to the instructions and keep hands and
feet well away from the blades and discharge opening at all times..



Do not tilt the lawn mower when starting the engine.



Do not start the engine when standing in front of the discharge opening.



Do not put hands or feet near or under rotating parts.



Never pick up or carry a lawn mower while the engine is running.



Stop the engine and disconnect the spark plug cap:
-  Before clearing a blockage or unclogging the mower.
-  Before checking, cleaning or working on the mower.
-  After striking a foreign object. Inspect the mower for damage and
  make repairs before restarting and operating the mower.
-  If the mower starts to vibrate abnormally, check immediately.



Stop the engine:
- Whenever you leave the mower.
- Before refuelling the mower. Allow to cool before refuelling.



Reduce the throttle setting during engine shut down and turn the fuel
valve off at the conclusion of mowing ( Except Auto Choke models).



Keep all nuts, bolts and screws tight to be sure the mower is in safe
working condition.



Never store the mower with petrol in the tank inside a building where
fumes may reach an open flame or spark. Allow the engine to cool before
storing in any enclosure.



To reduce the fire hazard, keep the engine, muffler and petrol tank area
free of grass, leaves or excessive grease.



Replace worn or damaged parts for safety.



If the fuel tank has to be drained, this should be done outdoors.



Wear eye protection.

«
...
5
6
7
8
9
...
»

Содержание HRU196K1




































































Отзывы:

Нет отзывов

Похожие инструкции для HRU196K1

Rotary Cutters RCR1860

Бренд: Land Pride Страницы: 34

Бренд: Flymo Страницы: 10

Бренд: Ferris Страницы: 60

Бренд: MTD Страницы: 12

Бренд: Gianni Ferrari Страницы: 96

Бренд: Snapper Страницы: 1

Бренд: DR Страницы: 44

Бренд: Qualcast Страницы: 22

Бренд: Brill Страницы: 104

Бренд: Exmark Страницы: 4

Бренд: Bushranger Страницы: 20

Бренд: Bushranger Страницы: 24

Бренд: Bushranger Страницы: 26

Бренд: New Holland Страницы: 4

Бренд: Maruyama Страницы: 76

Бренд: Craftsman Страницы: 44

Бренд: Craftsman Страницы: 44

Бренд: Craftsman Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды