Honda HRU196K1 страница 38 Скачать руководство пользователя | Manualshive

Страница: 38 / 67

background image

37

7. TRANSPORTING/STORAGE - continued

Cleaning

Wash your mower after use, by hand, and be careful to prevent water from
entering the air cleaner and/or muffler.

NOTE: Using a garden hose or pressure washing equipment can force
water into the air cleaner, which will soak the filters and can enter the
carburettor or engine, causing damage.

Cold water on a hot engine can cause damage. If the engine has been
running, allow it to cool for at least 30 minutes before washing.

Cutter Housing

If using a garden hose or pressure washing equipment to clean the upper
side of the cutter housing, be careful to avoid getting water into controls
and cables or anywhere near the engine air cleaner or muffler opening.

To  wash  the  underside  of  the  cutter  deck,  attach  a  garden  hose  to  the
fitting  on  the  cutter  deck  (see  below)  and  turn  water  on.  Start  engine,
engage  blades,  and  allow  it  to  run  at  normal  operating  speed  for  several
minutes.  This  should  be  done  in  an  area  where  the  water  and  debris  can
run onto grass or a dirt surface.

Do not flush the water or debris into the

storm water system.

1.

After washing the lawn mower, remove garden hose and wipe dry all
accessible surfaces.

2.

With the mower in an upright position, start the engine outdoors and let
it run until it reaches normal operating temperature to evaporate any
water remaining on the engine.

3.

Stop the engine and allow it to cool.

4.

After the lawn mower is clean and dry, coat areas that may rust with a
light film of oil or Silicon Spray. Also lubricate the control cable cores
with a silicon spray lubricant.

«
...
36
37
38
39
40
...
»

Содержание HRU196K1




































































Отзывы:

Нет отзывов

Похожие инструкции для HRU196K1

Бренд: Ransomes Страницы: 54

Бренд: Toro Страницы: 48

Бренд: MTD Страницы: 16

Бренд: Murray Страницы: 56

Бренд: Land Pride Страницы: 2

Silver Series 10270

Бренд: Lawn-Boy Страницы: 29

Бренд: Nakayama Страницы: 19

Бренд: Qualcast Страницы: 15

Бренд: Weed Eater Страницы: 16

Бренд: Toro Страницы: 44

Бренд: Worx Страницы: 132

Бренд: Cub Cadet Страницы: 39

Бренд: Land Pride Страницы: 58

Бренд: MTD Страницы: 32

Бренд: Tru-Turf Страницы: 17

Бренд: Troy-Bilt Страницы: 20

Бренд: Troy-Bilt Страницы: 44

Бренд: ST. SpA Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды