PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirements:
Introduction
The HON-AUX* adapter allows users t to connect and play any audio device with
a 3.5mm jack to select 1992-98 Honda and select 1992-01 Acura radios. Simply
connect the adapter to the 8-pin CD changer port on the radio and to audio
device and enjoy stored content or music from the internet if using Smartphone.
The HON-AUX replaces factory CD changer or slave CD player (if present)
Installation
1.
Remove the Honda radio from the dash to gain access to the connector.
2.
Disconnect any accessory connected to the 8-pin socket (See
Fig. 2
)
3.
Connect 8-pin plug (See
Fig. 1
) to radio or slave cassette (See.
Fig. 2
)
Fig. 1
Fig. 2
8-pin socket
4.
Connect one end of supplied 3.5mm audio cable (See
Fig. 3
) to the
input jack on adapter (See
Fig. 4
) and route other end to the front of
the dash or wherever audio device will reside (within 3 ft.)
Fig. 3
Audio cable
Fig. 4
3.5mm jack
