Honda GX120T2, Инструкция к добавке

Страница: 16 / 30

SPECIFICATIONS
1-13
ENGINE SPECIFICATIONS
*1: The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max net torque). Mass production
engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous
factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
*2: When tilted at 14°
Model GX120T2 GX160T2 GX200T2
Description code GCBNT GCBST GCBUT
Type 4 stroke, overhead valve, single cylinder, inclined by 25°
Displacement 118 cm 3 (7.2 cu-in) 163 cm 3 (9.9 cu-in) 196 cm 3 (12.0 cu-in)
Bore x stroke 60.0 x 42.0 mm
(2.36 x 1.65 in)
68.0 x 45.0 mm
(2.68 x 1.77 in)
68.0 x 54.0 mm
(2.68 x 2.13 in)
Net power (SAE J1349) *1 2.6 kW (3.5 HP)/
3,600 min -1 (rpm)
3.6 kW (4.8 HP)/
3,600 min -1 (rpm)
4.1 kW (5.5 HP)/
3,600 min -1 (rpm)
Continuous rated power 2.1 kW (2.8 HP)/
3,600 min
-1
(rpm)
2.9 kW (3.9 HP)/
3,600 min
-1
(rpm)
3.7 kW (5.0 HP)/
3,600 min
-1
(rpm)
Maximum net torque
(SAE J1349) *1
7.3 N·m (0.7 kgf·m, 5.4
lbf·ft)/2,500 min -1 (rpm)
10.3 N·m (1.1 kgf·m, 7.6
lbf·ft)/2,500 min -1 (rpm)
12.4 N·m (1.3 kgf·m, 9
lbf·ft)/2,500 min -1 (rpm)
Compression ratio 8.5 : 1 9.0 : 1 8.5 : 1
Fuel consumption
(at continuous rated power)
1.0 Liter (0.26 US gal,
0.22 Imp gal)/h
1.4 Liters (0.37 US gal,
0.31 Imp gal)/h
1.7 Liters (0.45 US gal,
0.37 Imp gal)/h
Ignition system C.D.I. (Capacitor Discharge Ignition) type magneto ignition
Ignition timing B.T.D.C. 20°/
1,400 min -1 (rpm)
B.T.D.C. 18°/
1,400 min -1 (rpm)
B.T.D.C. 20°/
1,400 min -1 (rpm)
Recommended
spark plug
Except
rammer type
BPR6ES (NGK)/W20EPR-U (DENSO)
Rammer type BPR4ES (NGK)/
W14EPR-U (DENSO)
– –
Lubrication system Forced splash
Oil capacity Except
rammer type
0.56 Liter (0.59 US qt,
0.49 Imp qt)
0.58 Liter (0.61 US qt,
0.51 Imp qt)
0.60 Liter (0.63 US qt,
0.53 Imp qt)
Rammer type 0.40 Liter (0.42 US qt,
0.35 Imp qt) *2
– –
Recommended oil SAE 10W-30 API service classification SJ or higher
Cooling system Forced air
Starting system Recoil Starter Recoil, Recoil and Starter motor
Stopping system Ignition exciter coil circuit open
Carburetor (Rammer type) Horizontal type, butterfly
valve (float valve)
Horizontal type, butterfly valve
Air cleaner (Rammer type) Dual type, Dual silent
type, Low profile type,
Semi dry type, Oil bath
type, (Rammer type)
Dual type, Dual silent
type, Low profile type,
Semi dry type, Oil bath
type
Dual silent type,
Low profile type,
Semi dry type, Oil bath
type
Governor Mechanical centrifugal
Breather system Reed valve type
Fuel used Unleaded gasoline with a pump octane rating 86 or higher
Fuel tank capacity 2.0 Liters (0.53 US gal,
0.44 Imp gal)
3.1 Liters (0.82 US gal, 0.68 Imp gal)
Reduction case
oil capacity
Chain type
(Without clutch)
Shared with engine oil
Chain type
(With clutch)
–
0.50 Liter (0.53 US qt,
0.44 Imp qt)
–
Camshaft P.T.O. – Shared with engine oil
Clutch Type – Centrifugal –
Engagement
start
– 1,800 min
-1
(rpm) –
Lock – 2,200 min
-1
(rpm) –
62Z4H00X.book 13 ページ ２０１１年１２月９日 金曜日 午後５時４０分