
99
INITIAL USE INSTRUCTIONS
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered
under the
Distributor’s Limited Warranty.
Move the generator at least 10 feet (3 meters) away from the fueling
source and site before starting the engine.
BATTERY
WARNING:
Battery posts, terminals, and related accessories contain
lead and lead components.
Wash hands after handling.
The battery is disconnected for shipment.
1. Remove the cover (see page 59)
2. Connect the battery positive (+) cable to the battery positive (+)
terminal first, and tighten the bolt securely.
3. Slide the battery boot over the positive (+) cable and terminal.
4. Connect the battery negative (–) cable to the battery negative (–)
terminal, and tighten the bolt securely.
5. Install the battery holder band.
6. Install the battery cover in the reverse order of removal (see page
59).
Never operate the generator without the battery cover in place, as
poor engine and generator performance will result.
BATTERY BOOT
POSITIVE (+)
CABLE
BATTERY HOLDER BAND
NEGATIVE (–) CABLE
31Z236120.book 99 ページ 2015年12月10日 木曜日 午前11時43分
Содержание EM4000SX
Страница 110: ...108 MEMO 31Z236120 book 108...