The Braking System
Brake Wear Indicators
The front disc brakes on all cars
have audible brake wear indicators.
They are also on the rear brakes of
the Si and VTEC models.
When the brake pads need replacing,
you will hear a distinctive metallic
"screeching" sound when you apply
the brakes. If you do not have the
brake pads replaced, they will begin
screeching all the time.
Your brakes may sometimes squeal
or squeak when you apply them
lightly. Do not confuse this with the
brake wear indicators. They make a
very audible "screeching".
Brake System Design
The hydraulic system that operates
the brakes has two separate circuits.
Each circuit works diagonally across
the car (the left-front brake is
connected with the right-rear brake,
etc.). If one circuit should develop a
problem, you will still have braking
at two wheels.
If this happens, you will immediately
notice that the brake pedal goes
down much farther and you need to
press on it much harder. A much
longer distance will be needed to
stop the car.
Slow the car by downshifting to a
lower gear and removing your foot
from the accelerator pedal. Pull to
the side of the road as soon as it is
safe. Because of the longer stopping
distance needed, brake system
failure is very hazardous. It is best to
have your car towed, but if you must
drive the car in this condition, be
extremely cautious. Have your car
repaired as soon as possible.
Driving
Front
Содержание Del Sol 1995
Страница 114: ...Towing a Trailer Your car is not designed to tow a trailer Attempting to do so can void your warranties Driving...
Страница 190: ...Fuses INTERIOR FUSE BOX On Canadian cars Taking Care of the Unexpected...
Страница 191: ...Fuses UNDERHOOD FUSE BOX ABS FUSE BOX Taking Care of the Unexpected...
Страница 197: ...Specifications 1 S 2 Si 3 VTEC 4 U S Si with ABS Technical Information page 192 page 193 VTEC...