Honda CRF450X 2007, Руководство пользователя

Страница: 116 / 185

Front Suspension Adjustments
Adjustments for Competition
111
11.Clean the fork assembly, especially the sliding
surface of the slider (18) and dust seal (19).
12.Record the rebound and compression damping
adjuster positions and turn the adjuster
counterclockwise until it stops.
13.Measure the length (20) between the axle
holder and outer tube and record it before
disassembling the fork.
Standard: 12.5 ± 0.08 in (317 ± 2 mm)
(21) outer tube (22) guide bushing
15.Drain the fork oil from the outer tube (21).
Drain the fork oil from the oil hole (25) of the
fork damper.
The outer tube can drop on the slider and
damage the fork dust seal and guide bushing
when the fork damper is removed. To avoid
damage hold both the outer tube and slider when
removing the fork damper.
NOTICE
(21) outer tube (23) lock nut wrench
(22) fork damper (24) slider, lower end
(21) outer tube (25) oil hole
(18) slider (20) length
(19) dust seal
14.Hold the outer tube (21), then remove the fork
damper (22) from the outer tube using the
lock nut wrench (23). Gently slide the outer
tube down onto the lower end of the slider
(24).
(22)
(21)
(20)
(19)
(18)
(23)
(21)
(22)
(21)
(24)
(21) (25)
(cont’d)
16.Temporarily install the fork damper to the
outer tube.
17.Set the axle holder (26) of the slider in a vise
with a piece of wood or soft jaws to avoid
damage.
Over-tightening the vise can damage the axle
holder.
18.Loosen the fork center bolt (27).
NOTICE
(26) axle holder (27) fork center bolt
(27)
(26)
107-131.qxd 06.3.27 6:31 PM ページ111