background image

Warm Engine Starting

a

Shift the transmission into neutral.

b

With the throttle completely closed, pull the

clutch lever all the way in and press the start

button.

Starting the engine excessively charged

with fuel by throttle blipping or other

reasons

a

Shift the transmission into neutral.

b

With the throttle fully opened, pull the clutch

lever and press the start button for 5

seconds to discharge excessive fuel from the

engine.

c

With the throttle completely closed, pull the

clutch lever all the way in and press the start

button.

#

If Engine Will Not Start 

(

P.52

)

When starting the engine, the PGM-FI

malfunction indicator lamp (MIL) (amber) will

stay on for 2 seconds, then go off. Then, the

engine mode indicator (blue) indicates the

current engine mode for 0.8 seconds, then

goes off. If the PGM-FI malfunction indicator

lamp (MIL)/engine mode indicator does not

come on or go off when it should, have your

dealer check it for problems.

Operation Guide

26

Starting the Engine

 

(Continued)

PGM-FI malfunction indicator lamp

(MIL) (amber)/

engine mode indicator (blue)

Содержание CRF450R 2022



















































































Отзывы: