40 |
| 41
AUDIO AND CONNECTIVITY
AUDIO AND CONNECTIVITY
Learn how to operate the vehicle’s audio system.
Basic Audio Operation
Connect audio devices and operate buttons and displays for the audio system.
USB Ports
1. Open one of the USB covers in the front console.
2. Insert a USB flash drive or connect another
audio device, such as an iPod
®
or iPhone
®
, into
the USB port.
iPod and iPhone are trademarks of Apple, Inc.
State, provincial, or local laws may prohibit the operation
of handheld electronic devices while operating a vehicle.
AUDIO AND CONNECTIVITY
Do not insert an automotive type cigarette lighter element. This can overheat
the power socket.
NOTICE
HDMI Port
You can play video from a compatible device while your vehicle is stopped. From
the connected device, launch the video you want to display on the touchscreen.
The device or video resolution must be 720p or lower to view.
1. Open the HDMI cover in the front console.
2. Insert an HDMI cable into the HDMI port.
Additional cables and connectors sold separately.
Accessory Power Socket
Open the socket cover in the front console to use
power when the vehicle is on.
USB ports
HDMI port
Steering Wheel Controls
You can operate certain functions of the audio system using the steering wheel
controls.
MODE button:
Cycle through available audio modes.
VOL (
p
/
q
) buttons:
Adjust audio volume.
CH (+ / -) buttons:
Change presets, tracks, albums,
or folders.
FM/AM Radio
Press (
+
) or (
-
) for the next or previous station.
Press and hold (
+
) or (
-
) for the next or previous strong station.
CD/iPod
®
/USB/
Bluetooth
®
Audio
Press (
+
) or (
-
) for the next or previous track.
Press and hold (
+
) or (
-
) for the next or previous folder (CD/USB).
Pandora
®
(U.S. only)
Press (
+
) for the next song.
Press and hold (
+
) or (
-
) for the next or previous station.
Adjusting the Sound
Adjust various sound settings. Use the touchscreen to make selections.
1. From the HOME screen, select Settings.
2. Select Audio.
3. Select Sound.
4. Select the tabs to change the sound mode and
adjust the setting.
5. Select OK when complete.