2. Turn and pull the tab to open the compartment cover located on the left
side of the cargo area. Turn the jack's end bracket to loosen it, then
remove it.
3. Take the tool case or bag out. Take the jack handle bar and wheel nut
wrench out of the tool case or bag.
4. Unscrew the wing bolt, then remove the spacer cone. Remove the spare
tire.
5. Place the spare tire (wheel side up)
under the vehicle body, near the tire
that needs to be replaced.
HANDLING THE UNEXPECTED
112 |
6. Loosen each wheel nut about one
turn using the wheel nut wrench.
n
Setting Up the Jack
1. Place the jack under the jacking
point closest to the tire to be
changed.
2. Turn the end bracket clockwise (as
shown in the image) until the top of
the jack contacts the jacking point.
Make sure that the jacking point tab
is resting in the jack notch.
HANDLING THE UNEXPECTED
| 113
