Honda CFR-450 2013, Руководство пользователя

Страница: 92 / 177

Servicing Your Honda
85
Piston/Piston Rings/Piston Pin
11. Connect the breather tube A (22) and B (23).
Connect the IAT sensor connector (24).
12. Connect the radiator hose (25) to the water
hose joint (26) of the cylinder head.
13. Tighten the radiator hose clamp screw (27) as
illustrated below.
14. Connect the ECT sensor connector (28).
15. Install the ignition coil (29) and tighten the
ignition coil bolts (30).
Connect the ignition coil connectors (31).
16. Install the shims, valve lifters, camshaft and
camshaft holder (page 72).
17. Install the crankshaft hole cap (page 74).
18. Install the cylinder head cover (page 75).
19. Install the spark plug (page 66).
20. Install the exhaust pipe (page 103).
21. Install the subframe (page 37) and left and
right mufflers (page 101).
22. Install the fuel tank and seat (pages 33, 35).
23. Fill and bleed the cooling system (page 145).
Check for the following:
– compression leaks
– abnormal engine noise
– secondary air leaks
– exhaust gas leaks
– coolant leaks
– oil leaks
(22) breather tube A
(23) breather tube B
(24) IAT sensor connector
(25) radiator hose
(26) water hose joint
(22)
(23)
(24)
(25)
(26)
(27) radiator hose clamp screw
(28) ECT sensor connector
(27)
0 – 0.04 in
(0 – 1.0 mm)
(28)
(29) ignition coil
(30) ignition coil bolts
(31) ignition coil connectors
(30)
(29)
(31)