background image

Engine Will Not Start (HISS indicator stays on)

Starter Motor Operates But

Engine Does Not Start

Check the following items:

Check the correct engine starting

sequence. 

2

P. 56

Check that there is petrol in the fuel tank.

Check if the PGM-FI malfunction indicator

lamp (MIL) is on.

u

If the indicator lamp is on, contact

your dealer as soon as possible.

Check if the HISS indicator stays on.

u

Turn the ignition switch to the   (Off)

position and remove the key. Reinsert

the key and turn the ignition switch to

the   (On) position. If the indicator still

stays on, check the following:

Check if there is no another HISS key

(including spare key) close to the

ignition switch.

Check if there are no any metallic seals

or stickers on the key.
If the HISS indicator still stays on, have

your vehicle inspected by your dealer.

Starter Motor Does Not

Operate

Check the following items:

Check the correct engine starting

sequence. 

2

P. 56

Make sure engine stop switch is in the 

(Run) position. 

2

P. 52

Check for a blown fuse. 

2

P. 114

Check for a loose battery connection

(

2

P. 85) or battery terminal corrosion

(

2

P. 75).

Check the condition of the battery.

2

P. 113

If the problem continues, have your vehicle

inspected by your dealer.

20201027183007_32MKYC000_eng_BOOK Page 107 Tuesday, October 27 2020 18:34:30 JST

Troubleshooting

104

Содержание CBR650RA








































































































































Отзывы: