Honda BeAT 2022, Руководство пользователя, Страница: 76 / 123

6.
Remove the bolts, oil strainer screen
cover, gasket and oil strainer screen and
let the remaining oil drain out.
u
Discard the oil at an approved
recycling centre.
7.
Clean the oil strainer screen.
8. Check that the oil strainer screen and
sealing rubber are in good condition.
9.
Replace the gasket.
10.
Attach the gasket to the oil strainer screen
cover.
Install the oil strainer screen, oil strainer
screen cover and bolts and tighten.
u
When installing the oil strainer screen,
make sure that the thin side is inside.
11.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
12.
Fill the crankcase with the recommended
oil (
2
P. 55,
2
P. 112) and install the oil fill
cap/dipstick.
Required oil
When changing oil & cleaning the
strainer screen:
0.75 L (0.79 US qt, 0.66 Imp qt)
When changing oil only:
0.65 L (0.69 US qt, 0.57 Imp qt)
13. Check the oil level.
2
P. 69
14.
Check that there are no oil leaks.
20191121121003_32K0JA010_eng_BOOK Page 75 Thursday, November 21 2019 12:13:24 JST
Engine Oil
u
Changing Engine Oil, Cleaning Strainer Screen
Maintenance
72