uu
Emergency Towing
u
312
Han
dlin
g the U
n
expected
3.
Take the towing hook and the wheel nut
wrench out of the tool bag in the boot.
4.
Screw the towing hook into the hole, and
tighten it with the wheel nut wrench
securely.
5.
Hook the towing device to the towing
hook.
6.
Start the engine.
u
If it is difficult to turn on the engine, put
the ignition switch in ACCESSORY
(
q
*1
or ON
(
w
*1
.
7.
Shift to
(
N
.
7.
Depress the brake pedal.
8.
Shift to
(
D
and hold for 5 seconds, then to
(
N
.
9.
Release the parking brake.
*1 : Models with the keyless access system have an
ENGINE START/STOP
button instead of an ignition
switch.
1
If your vehicle must be towed with the front wheels on the
ground:
With the front wheels on the ground, it is best to tow
the vehicle no farther than 80 km, and keep the
speed below 55 km/h.
Towing a vehicle is prohibited by law in some
countries. Check and follow the legal requirements
of the country you are driving before towing your
vehicle.
To avoid damage to your vehicle, use the towing
hook for straight, flat ground towing only. Do not
tow at an angle. This hook should not be used to tow
the vehicle onto a flat bed. Do not use it as a tie
down.
NOTICE
If you cannot shift the transmission or turn on the
engine, will damage the transmission. Your vehicle
must be transported with the front wheels off the
ground.
Do not slip the clutch for a long time to get unstuck.
This may overheat and damage the transmission.
Continuously variable transmission models
Manual transmission models
Towing Hook
Manual transmission models
Continuously variable transmission models
All models
2UA_Manual_ 30-03-18.indd 315
4/5/2018 3:05:48 PM
Содержание Amaze 2018
Страница 1: ......
Страница 26: ...24 2UA_Manual_ 30 03 18 indd 27 4 5 2018 3 04 21 PM ...
Страница 72: ...70 2UA_Manual_ 30 03 18 indd 73 4 5 2018 3 04 34 PM ...