−
−
−
＊
＊
Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to the
center when you release it or
complete a turn.
When the light switch is in either of
these positions, the lights on
indicator comes on as a reminder.
This indicator stays on if you leave
the lights on and turn the ignition
switch to the ACCESSORY (I) or
LOCK (0) position.
To switch from low
beams to high beams, push the left
lever forward until you hear a click.
The blue high beam indicator will
come on (see page
). Pull it back
to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams stay on as long as you hold
the lever back.
If equipped
Turning the switch to
the ‘‘
’’ position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights.
Turning the switch to the ‘‘
’’
position turns on the headlights.
If you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime
when you open the driver’s door.
Turn Signal
OFF
Parking and interior lights
AUTO
Headlights on
High Beams
Flash high beams
Fog lights off
Fog lights on
1.
2.
3.
4.
5.
6.
7.
8.
9.
:
61
Turn Signal
High Beams
Headlights
Turn Signals and Headlights
70
EX-L model is shown.
10/08/27 14:23:08 31TP6610_075
2011 Accord Crosstour
