−
−
CONTINUED
If you just
received your vehicle and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button. To do this,
press and hold the two outside
buttons on the HomeLink
transceiver for about 10
20 seconds,
until the red indicator flashes.
Release the buttons, then proceed to
step 1.
Refer to the safety information that
came with your garage door opener
to test that the safety features are
functioning properly. If you do not
have this information, contact the
manufacturer of the equipment.
Before programming HomeLink to a
garage door or gate opener, make
sure that people and objects are out
of the way of the device to prevent
potential injury or damage.
When programming a garage door
opener, park just outside the garage.
HomeLink Universal Transceiver
Training HomeLink
Important Saf ety Precautions
Bef ore you begin
Fe
a
tu
re
s
253
10/08/27 14:47:13 31TP6610_258
2011 Accord Crosstour