12-058
7 of 8
Install the Body Plugs
Install the four body plugs as shown.
(Driver’s side shown; passenger side is similar.)
Set the Tire Pressures
Set the tire pressures according to the label on the
driver’s doorjamb. Make sure the tires are normalized
(at ambient temperature) when checking and setting
the pressures.
Start the Tire Pressure Monitoring System
(TPMS) Calibration Process
NOTE: These procedures can be found on the sheet
titled Attention PDI Technician, located in the package
containing the front license plate holder.
Set all tires to the cold tire pressure specifications
listed on the driver’s doorjamb label and calibrate
the TPMS.
This vehicle is equipped with an indirect TPMS. Unlike
other systems that directly measure air pressure, an
indirect TPMS uses the ABS wheel speed sensors to
monitor and compare tire characteristics and determine
when one or more tires are significantly deflated. To
ensure proper operation, it is critical to inflate all four
tires to the pressures specified on the tire label in the
driver’s doorjamb and that the TPMS calibration is
started during the PDI.
• Non-Touring Models: With the shift lever in Park, turn
the ignition ON. Push and hold the TPMS button for
three seconds, then release the button. The indicator
will blink twice to indicate that calibration has begun.
Once started, the calibration will complete on its
own.
Front Body Plugs
Rear Body Plugs
REAR
WHEEL
FRONT
WHEEL
BODY PLUG
BODY PLUG
Push and hold the
TPMS button for
three seconds,
then release.
Indicator will blink
twice when
calibration begins.
